Fixed wall lamps or portable reading lamps provide additional illumination. They provide illuminati

For some health problems, such as appendicitis or sports injuries, hospital stay is inevitable. dance lights Hospitals are increasingly seeking to create a local, cozy atmosphere in the room to minimize patient discomfort. In doing so, adequate lighting plays a key role. Lighting hospital room to be flexible, with separate systems pulsation for different lighting tasks: general lighting, light for reading in bed, lighting for examinations and treatment in bed, night vision, ie monitoring of the patient dance lights and orientation. Lighting for examinations and treatment procedures for the treatment and care of the patient dance lights who is forced to lie in bed, the higher dance lights the level of lighting. Depending on the type of procedure, the standard DIN EN 12464-1 requires dance lights illumination of 300 lux for simple, and 1000 lux for complex examinations and treatment E. Such lighting level is achieved by using the entire lighting system in the room. It is important that the lighting does not cause glare that interferes with the work of doctors dance lights and paramedical staff.
General lighting Patients most of his time in the hospital carried out in a hospital room. In order to feel comfortable in their environment, general lighting should create a home, a comfortable dance lights atmosphere. Standard DIN EN 12464 prescribes dance lights a minimum illumination of 100 lux. Such is the level of illumination sufficient for easier care of the patient. dance lights In many cases lamps for general lighting already installed in medical devices, eg control panels mounted above the bed. The recommended additional or alternative lighting solutions can be obtained by using ceiling lamps for direct dance lights or indirect lighting, dance lights lighting for reading, and wall lamps and guide. dance lights They are equipped with the three-band fluorescent and compact fluorescent light bulbs that are more efficient when operated using electronic ballasts (EB). The ideal warm-white light. Lighting for observation and orientation Night lighting is used for viewing medical staff to monitor patients and medical equipment during the night. To avoid glare and light the patients in the supine position, beam must be focused on the ceiling or wall. Lighting observation is generally incorporated in the medical devices, eg control panels mounted above the bed. Standard DIN EN 12464-1 regulates illumination of 5 lux for conventional hospital rooms and 20 lux rooms for intensive care or pediatrics. dance lights
If the patients recovered to the extent that they can get up and move around, advised and additional orientation lighting. dance lights It helps patients to cope more easily at night without disturbing other patients in the room. Lamps intended for the visual task should be installed below the bed near the door. Recommended flood light distribution in the lower part of the lamp. Light reading light that lets you read the most important lighting is working for the patient. Here the lighting designer must take into account certain criteria: a standard dance lights DIN 5035-3 defines a surface for reading in bed the patient as an area of 900 mm wide and 300 mm high, which is horizontally dance lights tilted 75 degrees, with the center point 1100 mm above ground level and 800 mm from the top of the bed.
Fixed wall lamps or portable reading lamps provide additional illumination. They provide illumination of 300 lux for the purposes of hospital patients prescribed norm DIN EN 12464-1. The light from the lamps for reading glare should not interfere with a patient who is reading or other patients in nearby beds.
Posts