The lamp does not light, check the fuses and electrical connections, remove the lamp housing and check the sealing cap with its big thick 0-ring seals to prevent hide a lite water access electricity connection on the bulb check cable seals on the lamp housing. The bulbs tend to be black when the water came in behind the bulb and short circuits as the lamp is broken. Or when the lamp is turned on without water cooling.
By unscrewing the bulb housing (It is normally attached with 2 screws) hide a lite Remove the lamp housing and pull up the cable above the water, remove the old bulb - check the O-ring seal - Lamp cap - gasket for cable entry, installing new lamp and o - ring seal - lamp cover to the bottom of the lamp housing lamp potty in the pool wall, wrap the cable into the potty behind the lamp housing (or pull up the cable into the lamp socket if fitted) and attach the lamp housing back into the potty with the 2 screws. Try lamp.
Latest posts Lamp problems Lowered above ground pool cleaning pool stairs Swimming pool liner repair Tips before our start of the swimming pool Sand filter - Central valve / Some simple problems o solutions Pool Filter Pool Pump Checking hide a lite the connections Troubleshooting
Proudly powered hide a lite by WordPress
No comments:
Post a Comment